Subaru Impreza spec c

[hellbanger]

Hi guys!! can anyone help me to create a new stand alone car like this?
http://www.maj.com/gallery/hellbanger/Spec-c/pic.jpg
Thanks!

[hellbanger]

Help me please!

[RC45]

A lot more of us would get involved, if those that haev figured out all the bits and peices would simply list them and make a "whats needed to make a car" list available.

Until then - there will a few "wtih the secret knowledge" and then the rest of us who are trying to muddle though it. ;)

So - in short, unless one of the "chosen few" make the car - you are SOL.. :P

But FWIW, I am slowly figuring out whats needed to make a car.. and am comiling a list and once I get the first one done, will publish the "how to" - as bad as it will be :)

[hellbanger]

ok tkanks a lot!!!

[[RMT|SSR]ANDROSS]

A lot more of us would get involved, if those that haev figured out all the bits and peices would simply list them and make a "whats needed to make a car" list available.

Until then - there will a few "wtih the secret knowledge" and then the rest of us who are trying to muddle though it. ;)

So - in short, unless one of the "chosen few" make the car - you are SOL.. :P

But FWIW, I am slowly figuring out whats needed to make a car.. and am comiling a list and once I get the first one done, will publish the "how to" - as bad as it will be :)


http://forum.rscnet.org/showthread.php?t=273403

[hellbanger]

thanks a lot!!

[Grasshopper]

Just a quick remark, is that a 4 wheel drive impreza? (as far as i know they all are) I seem to remember from a wikipedia page on comparisons between physics engines of racing sims that gtr series does not support 4wd cars.

as far as the making, if there's no 3d model for this car available, it will have to be made from scratch, with a skin, then it has to be made conform to the naming standards for the game (doors, bumpers, breakable parts, wheels, exhausts, etc), this is a LOT of work, and can only be done by someone who has proper experience with 3d modelling if you want it to be realistic and not just a square box.
And that's only half the job,next thing needed are all the physics and sound files, which can be made from scratch, or use the ones from an existing car that is somewhat like the one you are making, and modify them
(this requires a lot of techical engine and performance data on the real car)

[rstratton]

just requires knowledge of the file structure and access to and knowhow to use the tools

[rstratton]

i would suggest getting zmodeler 2 and learning it

[AntMAn12]

its possible to convert the impreza mesh form NFS:MW, i mean, if anyone would take the time to do so. i personally have no knowledge of how to do it, but i have seen others converted(unreleased as of yet) .

[Goresh]

A lot more of us would get involved, if those that haev figured out all the bits and peices would simply list them and make a "whats needed to make a car" list available.

Until then - there will a few "wtih the secret knowledge" and then the rest of us who are trying to muddle though it. ;)

So - in short, unless one of the "chosen few" make the car - you are SOL.. :P

But FWIW, I am slowly figuring out whats needed to make a car.. and am comiling a list and once I get the first one done, will publish the "how to" - as bad as it will be :)

What a crock!! Theres no secret knowledge at all. I've not been editing GTR2 that long and have had no problems figuring things out. Between asking questions and alot of trial an error its not that hard. Seems to be alot of people these days that aren't willing to put in the effort and learn, it needs to be layed out, step by step. I have also tried to help anyone I can, I might not have all the answers but the things I do know I share openly, here and at the RSC forums. Point is, if one asks a specifiic question one tends to get help.

[HAMMER]

The guy is right people worry to much.

A mate of mine works for ISI he is doing a mod that I have drove.
But ya cant even mention the name of it........ ! . Thats fear.... hehehe ;)

i think thats what me meant by secret ..............

Sims in the 21st century need to be supported by Realtime Online design databases, we are stuck in the dark ages.

Then simbin or whoever could charge fees to run huge servers and you would get professional tutoring in realtime with aoftware ......paid classes in 3d mdelling, sounds. paint.

You think people would come and pay learn then rip off things
But I think it would have the opposite effect ...............

Housewives could come on and work on a tree sample or something instead of knitting :p

In a few years the quality of everything would improve. there would be more modders better trained and simbin would have made more money.

The top exisiting teams would have their own spaces naturally and responsibilites .........

Simbin or whoever would get paid for their servicers and in turn they would pay modders for giving lessons

If you had enough money you could have one on one lessons with the best lol

Hell you could even get a diploma, Top the Class ;) and get invited to join a mod team.

lol :up:


A one stop online database could make people a bit of money from fees, its long overdue

[zaomarano]

Hi All,

I am actually working on a NFSMW conversion of Impreza. The progress is as shown below, and with cockpit:roflmao:

I would like to release this car when it is ready. But I may take some more time, may be a few months or more, as my daily job is too busy :cry:

Please feel free to give me comments

[WildBat]

Very nice model that one :D Keep it up!

[lowndes888]

I remember ArnoldWong saying that NFS MW conversions have a very huge number of polygons and it's very PC demanding. That's why he did all the models himself. What's the number of polys on this one?

[Peltipurkki]

Hi All,

I am actually working on a NFSMW conversion of Impreza. The progress is as shown below, and with cockpit:roflmao:

I would like to release this car when it is ready. But I may take some more time, may be a few months or more, as my daily job is too busy :cry:

Please feel free to give me comments


Wow you are god! I just love imprezas and i've been waiting for someone to make one for gtr. Keep up the good work:up:

[heez]

Hi All,

I am actually working on a NFSMW conversion of Impreza. The progress is as shown below, and with cockpit:roflmao:

I would like to release this car when it is ready. But I may take some more time, may be a few months or more, as my daily job is too busy :cry:

Please feel free to give me comments
can you please not use the gay bodykits? use the 'stock' parts!

if possible, when released, have the possibilty of using different types of rims! that would b pretty awsome if i do say so myself!

[AntMAn12]

keep up the good work man. that car is certainly on a lot of wish lists, if you release it , you will be somewhat of a god

[frex]

Zaomarano that looks very nice! I have had GTR2 sitting on my shelf for some weeks now (am far too busy with GTL..), but this would certainly get my interest if it were to be eventually released.

Don't know if it would be any use to you or not, but I have an Impreza STi 2003 which is very similar bodystyle to your model (rear wing is different). I could take some pics of body shape, detailing, interior etc if it would be helpful to you?

[Freddyfartbox]

How about one like this?

[AWD]

please don't start picking up rocks because i mention this in an impreza thread but could you also work on an evo? :)

[File 1993]

How about one like this?

:eek:

[zaomarano]

Hey Guys,

Thanks for all of you showing the passion on my car. As I am still actually a newbie on modding GTR2 as well as a 'game', this impreza is my first project. I would like to concentrate on it at the moment until I finish it :) . Of course I also have thousands of dreams to import other sweet cars into GTR2, not only the impreza. Evo8 of course on my list, as well as the S2000, R32 GTR.... (too many, I don't want to make the thread too too long).

At the moment, I have imported a motec into the cockpit. But I am getting stuck with the better wheel models importing. When I job get less busy, I will continue.

Mr. Gorseh helped me on this model's backfire sometimes ago and I hope he can give me some hints on this later on.

Thanks for all your support!!:up:

[Peerless Thought]

That car looks so amazing. I am a total noob at computer gaming in general. I have been a console gamer all my life but decided to make the jump to PC gaming based off of games like GTR 2 and Crysis. I built a pretty nice rig that lets me run GTR 2 full boar and plan on picking up another 8800gts for SLI. But modding is something completely new to me and looks like something I would like to pick up as a hobby. If anyone has any information on some books to pick up or something it would be appreciated.

P.S. The Evo would be a nice addition also!

[zaomarano]

Hi Guys,

I am now working on the sound for my impreza but get stuck. I can make the .wav files works, but they are not mixed well. Could anyone give me some hints on how to tweak the mixing of engine sounds?

[RC45]

What a crock!! Theres no secret knowledge at all. I've not been editing GTR2 that long and have had no problems figuring things out. Between asking questions and alot of trial an error its not that hard. Seems to be alot of people these days that aren't willing to put in the effort and learn, it needs to be layed out, step by step. I have also tried to help anyone I can, I might not have all the answers but the things I do know I share openly, here and at the RSC forums. Point is, if one asks a specifiic question one tends to get help.

First - congrats on quoting a 6 month old reply - and well done as it seems to me you're an unemployed teenager with 18 hours a day that you can devote to "figuring it out" - so good for you.

And if there is no secret knowledge how about writing up everything youknow and posting it in a flawless "HowTo" guide?

I am sure you won't - because it's secret. :)

[Goresh]

LOL I haven't been an unemployed teenager in 30+ yrs and doubt I could pass as one. I'd love to write up a tutorial, and may just do so, but currently my time is being spent working on my own projects.
I'm a tad confused at your attitude, because I've taken the time and effort to figure things out, somehow I owe you an explanation on how things are done. Like if its not spelled out to you in clear and precise instructions, step by step, you have no hope in hell of ever editing this sim. If this is the case, editing GTR2 just might be the least of your worries.
If someone asks a specific question and I know the answer, I have always tried to help, I'm sorry you feel this isn't enough.

[griff_1999]

Is there any news on this one it seems to of stoped are you to busy :confused::argue:

[zaomarano]

Hihi,

A piece of quick update here, I am now working on the sound of the Impreza. Next step I need to work more on the texturing, but I don't know much to build a template actually. My model is only plannar mapped at the moment. It is not good for the final product. If someone can tell me how to make a template with the curved surfaces folded flat, then it would be very nice :p

In conculsion, here is the progress summary
1. car body converted from NFSMW;
2. Wheels imported from BMW M3GTR;
3. Cockpit converted from NFSMW;
4. Backfire implemented;
5. Motec implemented;
6. Suspension model adjusted and tuned for Impreza;
7. Custom made an engine of JGTC GT300 Impreza, referring to the curve in GT4;
8. Internal engine sound recorded from NFSMW and installed in-game.

[tibs]

Is it four wheel drive? The real one is.

[heez]

ooOOooOOO.... sounds good guys!
and it better be four-wheel drive! if not ill change it myself!
hope u guys release a template aswell for us to play with :)

so does that mean its almost done?

[zaomarano]

In terms of conversation, it's working in GTR2 now, just need to do some art work. But I would like to make at least a rollcage for the car:p

If someone here is able to work with texture mapping and building a template, then I may consider to let this guy continue with my work.

[tibs]

Any news?

[heez]

again... any news?

[zaomarano]

I am sorry I was so busy previously. Just want to know anyone had some good tutorials on the texporter plugin or the 'render to template' feature in Max?

[heez]

Can somebody please help him!

PLEASE!

[tibs]

Is this dead?

[heez]

i hope it aint!

i wud help but no fuk all about the stuff hes askin!

[gokshe]

can you please not use the gay bodykits? use the 'stock' parts!

if possible, when released, have the possibilty of using different types of rims! that would b pretty awsome if i do say so myself!


You could make the kit parts an option in the genstring of the .car file some of the stock ferraris are already like this for various hood types and so on. Satisfy more people it would. The more the merrier. :)

[morning_wood]

I have a full "Realistic Modders inc" chassis / engine / gearbox / suspension
etc ready to release soon for rFactor of this car. If you wish to make your mod "realistic" ( and I hope you do, I realy dont like fantasy made cars ) please contact me

[zaomarano]

Please have a look here:
http://www.nogripracing.com/gallery/showphoto.php?photo=8487&cat=511
http://www.nogripracing.com/gallery/showphoto.php?photo=8488
http://www.nogripracing.com/gallery/showphoto.php?photo=8489

I need some more work for the cockpit texturing in order to have a release. Please wait

[tibs]

Can somebody please help him?

[zaomarano]

Latest update

http://www.nogripracing.com/gallery/showphoto.php?photo=8663
http://www.nogripracing.com/gallery/showphoto.php?photo=8664

[AntMAn12]

breathtaking car man!! cant wait for the release. i owned a scooby once, loved that car.

[twpeople]

who have subaru mod?
i want it

[kris2kiss]

Just a quick remark, is that a 4 wheel drive impreza? (as far as i know they all are) I seem to remember from a wikipedia page on comparisons between physics engines of racing sims that gtr series does not support 4wd cars.

as far as the making, if there's no 3d model for this car available, it will have to be made from scratch, with a skin, then it has to be made conform to the naming standards for the game (doors, bumpers, breakable parts, wheels, exhausts, etc), this is a LOT of work, and can only be done by someone who has proper experience with 3d modelling if you want it to be realistic and not just a square box.
And that's only half the job,next thing needed are all the physics and sound files, which can be made from scratch, or use the ones from an existing car that is somewhat like the one you are making, and modify them
(this requires a lot of techical engine and performance data on the real car)


Please, just stop, 4WD is fully possible!

http://www.mysmiley.net/imgs/smile/party/party0023.gif
http://www.mysmiley.net/imgs/smile/sign/sign0024.gif
http://www.mysmiley.net/imgs/smile/tongue/tongue0007.gif
Yeah right! Miss ya.<3

[tibs]

4WD is no problem in GTR2. The drift mod is 4WD, as well as the RS4 mod...

zaomarano, can you please enable the handbrake in the mod?

[AntMAn12]

actually, they did make a front wheel drive version, but it was not used in racing. i had a 95 impreza that was front wheel drive. very rare.

[heez]

thats more than very rare!

[lowndes888]

Hmmm. Found this on Wikipedia:

"Introduced in November 1993, the Impreza was offered in either front wheel drive (FWD) or all wheel drive (AWD) versions and as a four-door sedan/saloon or five-door station wagon/estate."

Doesn't sound as rare to me:D

[heez]

i wonder how many people actually went for the front wheel drive one though? like numbers wise against the 4WD?

[zaomarano]

No problem if you need a FF one
:roflmao:

[twpeople]

Can anyone share Subaru Mode?

[zaomarano]

It has not yet ready yet. Please be patient:p

[zaomarano]

:roflmao:
Please have a look on the followings. Enjoy!

http://www.nogripracing.com/gallery/showphoto.php?photo=10476
http://www.nogripracing.com/gallery/showphoto.php?photo=10477
http://www.nogripracing.com/gallery/showphoto.php?photo=10478

[Qs-racer]

very nice ;)

[purplesalad]

good looking inside and outside

[gtrsmasher]

:roflmao:
Please have a look on the followings. Enjoy!

http://www.nogripracing.com/gallery/showphoto.php?photo=10476
http://www.nogripracing.com/gallery/showphoto.php?photo=10477
http://www.nogripracing.com/gallery/showphoto.php?photo=10478
Fine work! It will be a great add on.
After this, think in an awesome mitsubishi evo 5 or newest!
We need more japanese cars on gtr2!

[zaomarano]

Thanks. I am going to work on some skins of the Impreza. Then it will be ready to release. My next project will be an evo 8;)

[lowndes888]

Thanks. I am going to work on some skins of the Impreza. Then it will be ready to release. My next project will be an evo 8;)

Very nice car dude please release it as soon as everything's done:)

[gtrsmasher]

Thanks. I am going to work on some skins of the Impreza. Then it will be ready to release. My next project will be an evo 8;)
Excellent news! Be sure a lot of people will enjoy this mitsubishi release! Certainly one of the most famous race car in the games. Congratulations for your next project!

[zaomarano]

I am making a Jun Auto Super Lemon GDB Impreza skin. Please see the early WIP here:
http://www.nogripracing.com/gallery/showphoto.php?photo=10623&nocache=1
Do you like it?

[Jhybe]

Love it :p
Can u release a beta version?

[twpeople]

where and when can I download this skin ?
I am waiting long time~~T_T

[zaomarano]

The Jun Super Lemon Skin is finished. But I am now getting stuck on how to set up teams with different skins. I want to make a few more skins before the release.

[purplesalad]

good cant wait

[zaomarano]

Please see here for the progress:

http://www.nogripracing.com/gallery/showphoto.php?photo=10786
http://www.nogripracing.com/gallery/showphoto.php?photo=10787

[purplesalad]

its coming along very nice does it have 4WD in the game i wish there where rally tracks too to go with the car

[JMSpeed]

Nice skin :)

...when are you adding shading? I think that will improve it's appearance greatly.

[zaomarano]

Second Impreza Race Car, Proca Racing Division Impreza

Please see http://www.nogripracing.com/gallery/showphoto.php?photo=10996 and http://www.nogripracing.com/gallery/showphoto.php?photo=10997

Hope you like it

[mertz]

Those shots look great.:D I'm looking forward to the release:up:

[morning_wood]

what about physics? do you have a physics team member? are you doing true spec? or some fantasy physics or from another mod? I have all the sim-tech data for a Subaru that is based on real life specs ( and mine drives faboulsy in 4wd )

let me know...

[gtrsmasher]

Second Impreza Race Car, Proca Racing Division Impreza

Please see http://www.nogripracing.com/gallery/showphoto.php?photo=10996 and http://www.nogripracing.com/gallery/showphoto.php?photo=10997

Hope you like it
Really nice work, zaomarano. It seems everybody wants the subaru now!... hehehe...
Why dont you release the templates, and you will have a lot of new skins to launch with the mod?
Regards.

[twpeople]

Really nice work, zaomarano. It seems everybody wants the subaru now!... hehehe...
Why dont you release the templates, and you will have a lot of new skins to launch with the mod?
Regards.



where can I download this Mod?

[gazman]

where can I download this Mod?

You have to wait :zen:

[krysztal666]

O my God!!! This mod will be genious!! release beta please

[zaomarano]

I have finished the physics by myself already.

what about physics? do you have a physics team member? are you doing true spec? or some fantasy physics or from another mod? I have all the sim-tech data for a Subaru that is based on real life specs ( and mine drives faboulsy in 4wd )

let me know...

[subie_rev]

are the physics true to life?

[krysztal666]

please give us a chanse to drive this uncredible car :D :D :D

[zaomarano]

I am sure you will have a chance very soon:roflmao:

[krysztal666]

We don't want to wait:P please Im very unpatient:P I love subaru:)

[subie_rev]

Will it be ready this summer? Also is there any chance that you can also convert a stock body 06/07 sti from nfs carbon? Btw, you will be able to get alot of very nice 3d models when nfs pro street comes out :).

wow, i'd marry that car :p lol

[zaomarano]

Progress is good. I cannot gurantee any date of release but there is quite a high chance to be released this summer. For impreza in NFS carbon, I have a plan to convert them, but first of all, I want to make a evo8 first :D

[purplesalad]

i hate that word

wait i here it all the time now

[subie_rev]

What word? :confused:

[purplesalad]

wait and soon nerver liked them

[subie_rev]

hey zaomarano, you should have a vote thread on whether people want evo9 or evo8... BTW i've started a thread on the subject but nobody has replied, how do you change AWD power split? I know that by default the line 'FOUR' is a 50/50 split (trying to make an awd 350z with a 41/59 power split). I thought you might know since you are working on an awd car.

[lowndes888]

hey zaomarano, you should have a vote thread on whether people want evo9 or evo8. Hows that subie coming along?

He'll do whatever he wants, after all he is the one thats making it:up:

[krysztal666]

... how do you change AWD power split? I know that by default the line 'FOUR' is a 50/50 split (trying to make an awd 350z with a 41/59 power split)....

You can do it like that:
WheelDrive=FOUR (41/59)
but this metod is not good, because before start engine blows up, but after restart everything is all right, I dont know how to do it different:(

[subie_rev]

Thanks :)

lol wow thats pretty strange, why would the engine blow up from a tranny modification :confused:

[subie_rev]

Hows the progress going on the subie? what more needs to be done before release?

[gazman]

hey zaomarano, you should have a vote thread on whether people want evo9 or evo8... ooohh big difference there

[gazman]

QUOTE: hey zaomarano, you should have a vote thread on whether people want evo9 or evo8... ooohh big difference there :spam: :slap:

[dickhole]

Why there should be a vote about evo 9 or 8? they are practically the same car...

[zaomarano]

Hows the progress going on the subie? what more needs to be done before release?

Only requires some reviews on the .hdc file and that's it:roflmao:

[lowndes888]

Only requires some reviews on the .hdc file and that's it:roflmao:

Sweet.

A question: Will it be near the performance of the Audi RS4? Or a JGTC touring car?

[morning_wood]

we can only hope he knows how to do physics correctly...
( I offered and was refused )

for those about the FOUR...
WheelDrive=FOUR (41/59) <----- will prolly cause issues, the syntax is incorrect.

correct
-------
WheelDrive=FOUR

there is another parameter that controls the tourqe split

[subie_rev]

Hey morning wood, so where do i change the torque split? Also is it possible to make variable split, eg on a straight its 40/60 while when you turn its closer to 50/50? Or is that to advanced for the game, really all it would take is something to measure g's and tyre slip.

As for the realistic physics i say let him release what he has first, we're all eager to drive it :) you can always ask him permission later to make an update like the rmi subie you have for rF. Any chance that you can convert that one to gtr2 btw? It would be nice to see an 07 sti in addition to the 04 being discussed here.:)

Zao, since you only have one thing left to do is there an approximate release date you can offer us?

[morning_wood]

you can vary the torque all you want by manipulating the HDC, in gtr2 you can only specify a static split, rFactor allows changes in the garage. NO, you cannot change the torque split once on track in either game.

[subie_rev]

Yes, thats what i did. I did the 41/59 thing beside FOUR, but since thats wrong how do you actually do it? What's the line i should look for?

Another small question: Do you have permission to convert the rmi subaru from rF to gtr2? I like the 07 model, that way we could all have the 04 and 07 model STIs simultaneously released... That would be heaven on earth :D

[morning_wood]

Curently there is no permission to release it yet... too bad too cuz this car simply rocks, and the physics IMHO are even better than my RMi rFactor version, although a few options are not avail in GTR2 ( rear ratio and torque split [ gear ratio is avail if you use the F1 mod tho] )... ( who knows what might happen... )

teaserz..

[purplesalad]

looking good to bad you cant release it yet :cry:

[subie_rev]

hmmm, STi... drool... More teasers! More teasers! :p

[subie_rev]

Any news on the release zao? Dying to drive it.

[gtrsmasher]

Any news on the release zao? Dying to drive it.


Totally agree... We want Subaru! hehehe...

[krysztal666]

We can't live without Subaru:]

[twpeople]

I can't race without Subaru

[zaomarano]

Two Imprezas are almost ready. But I would like to make the appropiate set of wheels for them first before a release :)

Also I want it to be competetive in NGT class so I need to increse the power of the engine a bit.

[lowndes888]

Two Imprezas are almost ready. But I would like to make the appropiate set of wheels for them first before a release :)

Also I want it to be competetive in NGT class so I need to increse the power of the engine a bit.

Why not have the same power as the Audi RS4s for some 4WD competition?:)

[zaomarano]

Photos updated at:
http://www.nogripracing.com/gallery/showphoto.php?photo=11592
http://www.nogripracing.com/gallery/showphoto.php?photo=11593
http://www.nogripracing.com/gallery/showphoto.php?photo=11594
http://www.nogripracing.com/gallery/showphoto.php?photo=11595
http://www.nogripracing.com/gallery/showphoto.php?photo=11596

Hope you like them!:)

[JMSpeed]

Why not have the same power as the Audi RS4s for some 4WD competition?:)

I like that idea! :)

Also, the car is coming along nicely. Well done so far :D

[mertz]

WOW Those are really looking COOL!!! I can't wait for the release!!!!!!!!!:p

[subie_rev]

Wait zao, about increasing the engine power... you should have 2 cars. one with stock (or street tuned) engine + suspension and another with the competitive class engine. :) I'll be driving this baby around alot of city tracks to bring back some of that oldschool nfsu nostalgia :p

[mertz]

Two Imprezas are almost ready. But I would like to make the appropiate set of wheels for them first before a release :)

Also I want it to be competetive in NGT class so I need to increse the power of the engine a bit.

Please do what you feel needs to be done for a proper release! They look AWESOME though!:D

[morning_wood]

*winks* to those who got my PM

[subie_rev]

Those cars are looking fantastic... I think for once i prefer a body kit over stock :D. Make sure to release it with a template. You should also have a choice between stock engine and race engine.

[twpeople]

Two Imprezas are almost ready. But I would like to make the appropiate set of wheels for them first before a release :)

Also I want it to be competetive in NGT class so I need to increse the power of the engine a bit.

I am waiting for your good news~~

[zaomarano]

version 1.0 is released.

Please see thread at http://www.nogripracing.com/forum/showthread.php?p=130377#post130377

[purplesalad]

great mod :)

[The Muts Nuts]

Nice one son!!

[subie_rev]

:p:):D:):D:):D:p:):up: You've completed my life lol

[krysztal666]

great work zaomarano :drive2: Subaru ruls. we are waitin for stock wersion and of course Lancer Evo :D :)

[tzoulis30]

hi very fine mod but is ready this mode???? never ready this mod?

[zaomarano]

hi very fine mod but is ready this mode???? never ready this mod?

version 1.0 is released.

Please see thread at http://www.nogripracing.com/forum/showthread.php?p=130377#post130377

Hope you enjoy the time with Impreza